Thermal & Optical Network Turret Camera Quick Start Guide
Figure 3-9 Mount the Ring
3.4 Install Network Cable Water-proof Jacket
Purpose:
If the camera is installed outdoor, you should use the waterproof accessory or
tapes to waterproof the cables. Otherwise the cables might get wet or a short
circuit occurs.
3.4.1 Install Network Cable Waterproof Jacket
Figure 3-10 Install Waterproof Jacket
Steps:
1. Feed the network cable through ① and ③ in order.
2. Fix ② on the network cable between ① and ③.
3. Place ⑤ onto the end of ⑥, and plug the RJ45 male connector into RJ45
female connector.
4. Screw ③ to ⑥ clockwise.
5. Push ② into ③.
To Next Page
Loading...
Need help?
General
