HIKVISION DS-3E2510P User Manual

- 2 -
If the indicator flickers, the system works
normally.
4
PoE
PoE indicator
corresponding to
each port
If the indicator is always on, the PoE works
normally.
If the indicator is off, the PoE does not work.
5
Lnk/Act
Lnk/Act indicator
corresponding to
each port
Green indicator is on: 10/100M is
transmitted;
Red indicator is on: 1000M is transmitted;
No indicator is on: no signal is transmitted.
6
/
8 RJ45 interfaces
Realizes the PoE function and forwards
10/100/1000M Ethernet electrical signals
7
Console
Console
Manages the switch locally.
8
/
2 SFP ports
Realizes the forward of gigabit Ethernet
optical signals.
Figure 1-2 Front template of the 24 switch
Table 1-3 Parts at the front template of the 24 switch
No.
Abbrev.
Name
Description
1
CONSOLE
Console port
Manages the switch locally.
2
SYS
System indicator
If the indicator is always on, the system
is being started.
If the indicator flickers, the system works
normally.
3
PWR
Power indicator
If the switch is powered on, the indicator
is on.
4
Link/ACT
LINK/ACT indicator of
each port
If the indicator is on in green: 10/100M,

HIKVISION DS-3E2510P Specifications

General

Brand	HIKVISION
Model	DS-3E2510P
Category	Switch
Language	English