HIKVISION DS-7116HQHI-K1 User Manual

Digital Video Recorder User Manual
92
Figure 5-27 More Settings
3) Check the checkbox of Redundant Record.
4) Click OK to save the settings.
5) If the encoding parameters can also be used to other channels, click Copy and choose the
channel you want to apply the settings.
5.9 Configuring HDD Group
Purpose
You can group the HDDs and save the record files in certain HDD group.
Step 1 Go to Menu > HDD > Advanced > Storage Mode.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed
information, please refer to Chapter 13.3 Managing HDD Group.
Step 2 Select General in the left bar.
Click to enter editing interface.
Step 3 Configuring HDD group.
1) Choose a group number for the HDD group.
2) Click Apply to save your settings.
3) Click OK to back to the upper level menu.
Step 4 Repeat the above steps to configure more HDD groups.
Step 5 Choose the Channels which you want to save the record files in the HDD group.
1) Go to Menu > HDD > Advanced > Storage Mode.

HIKVISION DS-7116HQHI-K1 Specifications

General

BNC input ports	1
Video input channels	16 channels
USB 2.0 ports quantity	2
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Power consumption (typical)	15 W
Voltage	12 V
Product color	White
Rack capacity	1U
Audio output channels	1.0 channels
Video compression formats	H.264, H.264+, H.265, H.265+
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	1000 g
Dimensions (WxDxH)	285 x 210 x 45 mm