EasyManuals Logo
Home>HIKVISION>Network Hardware>DS-7608NI-I2/8P

HIKVISION DS-7608NI-I2/8P Quick Start Guide

HIKVISION DS-7608NI-I2/8P
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Network Video Recorder Quick Start Guide
26
Chapter 3 Menu Operation
3.1 Start up Your Device
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
To start your device:
Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that
an Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power
button on the front panel should be red, indicating the device is receiving the power.
Step 2 Press the POWER button on the front panel. The Power LED should turn blue. The unit will
begin to start.
After the device starts up, the wizard will guide you through the initial settings, including modifying
password, date and time settings, network settings, HDD initializing, and recording.
3.2 Activate Your Device
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can also activate the device via Web Browser, SADP or
Client Software.
Step 1 Input the same password in the text field of Create New Password and Confirm New Password.
You can click to show the characters input.
Figure 3-1 Setting Admin Password

Other manuals for HIKVISION DS-7608NI-I2/8P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7608NI-I2/8P and is the answer not in the manual?

HIKVISION DS-7608NI-I2/8P Specifications

General IconGeneral
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)15 W
Total Power over Ethernet (PoE) budget120 W
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantity1
Ethernet LAN data rates10, 100, 1000 Mbit/s
Power over Ethernet (PoE)Yes
Ethernet LAN (RJ-45) ports9
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Power over Ethernet (PoE) ports quantity8
Number of fans1 fan(s)
Input bandwidth80 Mbit/s
Number of users64 user(s)
Output bandwidth256 Mbit/s
Maximum resolution3840 x 2160 pixels
Alarm input channels4
Video input channels8 channels
Video formats supportedH.264, H.264+, H.265, H.265+, MPEG4
Still image resolution(s)3840 x 2160, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768
Analog signal format systemNTSC, PAL
Resolution at capture speed1920x1080@60fps
HDD capacity0 GB
HDD interfaceSerial ATA
Maximum storage capacity12 TB
Number of HDDs installed0
Number of HDDs supported2
CertificationFCC Part 15 Subpart B, ANSI C63.4-2014 CE EN 55032:2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4
Product colorBlack, Silver
Rack capacity1U
Wi-FiNo
Weight and Dimensions IconWeight and Dimensions
Depth315 mm
Width385 mm
Height52 mm
Weight3000 g

Related product manuals