EasyManuals Logo
Home>HIKVISION>Card Reader>DS-K1103MK

HIKVISION DS-K1103MK Quick Start Guide

HIKVISION DS-K1103MK
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Title:
DS-K1100 Series Card Readers Connect
to DS-K2600 Series Access Controllers
by Wiegand
Version:
v1.0
Date:
6/21/2017
Product:
Access Control Device
Page:
1 of 5
DS-K1100 Series Card Readers Connect to DS-K2600
Series Access Controllers by Wiegand
Preparation
Connecting card reader to access controller is mainly applied to swiping card to open the door for entrring
or exiting. For card reader and access controller in this documents, please check the table below:
Card Reader
Access Controller
DS-K1101M/MK, DS-K1102M/MK,
DS-K1103M/MK, DS-K1104M/MK,
DS-K1107M/MK, DS-K1108M/MK
DS-K2601,
DS-K2602,
DS-K2604
DS-K1102E/EK, DS-K1107E/EK,
DS-K1108E/EK
Notice
1. Please cut off power supply before wiring;
2. DS-K1100 Series Card Readers support standard Wiegand 26/34 protocol; about Wiegand cable of
card reader, please check the table below:
Description
Power (DC +12V)
GND
W0 (available for Wiegand Protocol)
W1 (available for Wiegand Protocol)
Beep Control (available for Wiegand Protocol)
Blue/Green LED Control (available for Wiegand Protocol)
Red LED Control (available for Wiegand Protocol)
Tamper (available for Wiegand Protocol)
RS-485+
RS-485-
3. Correspondingly, there are wiegand interfaces in DS-K2600 series access controllers;
DS-K2601
DS-K2602
DS-K2604

Other manuals for HIKVISION DS-K1103MK

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1103MK and is the answer not in the manual?

HIKVISION DS-K1103MK Specifications

General IconGeneral
UN number-
Front cameraNo
RS-485 ports1
TypeBasic access control reader
CertificationFCC, CE
Product colorBlack, Grey
LED indicatorsStatus
RFID frequency13.56 MHz
Housing materialAcrylonitrile butadiene styrene (ABS), Polycarbonate (PC)
Access code readerYes
Authentication typeAccess chip/card
Keypad number of keys12
Access chip/card reader typeContactless
Contactless working distance50 mm
International Protection (IP) codeIP64
Operating temperature (T-T)-20 - 65 °C
Operating relative humidity (H-H)10 - 90 %
Input voltage12 V
Power consumption500 mA
Power consumption (typical)2 W
Weight and Dimensions IconWeight and Dimensions
Depth14.7 mm
Width76 mm
Height129 mm
Weight150 g

Related product manuals