HIKVISION DS-K1T501SF Manual

DS-K1T501SF call 2
nd
indoor station and Hik connect
List of devices and version :
Model
Firmware
DS-K8301WT
V1.5.0 build 181121
DS-KH8350-WTE1
V2.1.2 build 191014
DS-K1T501SF
V1.1.0 build 191010
IVMS-4200
V3.2.0.10 build 20191216
Functions:
1. DS-K1T501SF can support 1
st
and 2
nd
generation indoor
station with this version.
2. After adding the indoor station to Hik Connect , press the call
button on the DS-K1T501SF, both the indoor station and Hik
Connect will get the call.
3. Hik Connect can add the DS-K1T501SF directly without
indoor station.
4. DS-K1T501SF can support extensions at most 8 extensions.
Operations:
1. Download the firmware and upgrade the device, after
upgrading the device, please default all devices. Then
activate the device and change the IP address to which you
want.
2. Remote configuration on DS-K1T501SF , select General
and then change the Device Name to 10010110001.

HIKVISION DS-K1T501SF Specifications

General

Type	Basic access control reader
Product color	Gray
Cards capacity	50000 cards
Housing material	Metal
Keypad integrated	No
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Face recognition
Transaction capacity	200000
Fingerprint sensor type	Optical
Identification (1:N) time	1.5 s
False Rejection Rate (FRR)	0.01 %
False Acceptance Rate (FAR)	0.001 %
Access chip/card reader type	Contactless
International Protection (IP) code	IP65
DC current (max)	600 A
DC voltage range	12 V
Total megapixels	2 MP
Front camera type	Single camera
PC connected	-
RS-485 ports	1
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	218 mm
Width	78 mm
Height	41 mm