©2023 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
Trademarks
Disclaimer
Data Protec�on
Tamper
Alarm Interface
Tamper
Alarm Interface
Confirm Key
Fingerprint + Card Series
Card Series
1
2
3
5
4
1
Quick Guide
1.1 Check the environment.
1.3 Install the device.
2.1 Normal device wiring.
2.2 Wiring with secure door control unit.
3.2 Activate the device.
3.3 Log in.
2 Wiring
3 Quick Operation
Appearance
Keypad Installation
1 Installation
Before Installation:
Mounting Plate Dimension
1 2 3 4 5
Key 5: Hold to enable AP mode
#: Press # to confirm PIN entering.