HIKVISION DS-KABH6320-T Installation Guide

5 Installaon
It supports wall mounng. There are two installaon modes.
5.1 Installaon Accessory Descripon
The wall mounng plate is required when installing the indoor staon on the wall.
The dimension of wall mounng plate is shown below.
Figure 5-1 Wall Mounng Plate
5.2 Wall
Mounng
Before You Start
•
Make sure the device in the package is in good condion and all the assembly
parts are included.
•
The power supply the indoor
staon supports is 12 VDC. Please make sure your
power supply matches your indoor staon.
•
Make sure all related equipments are power-o during the installaon.
•
Check the product specicaon for the installaon environment.
Steps
1.
Fix the wall
mounng plate to the wall with 2 supplied screws.
Network Indoor
Staon Installaon Guide
6

HIKVISION DS-KABH6320-T Specifications

General

Brand	HIKVISION
Model	DS-KABH6320-T
Category	Intercom System
Language	English