HIKVISION DS-KD-M User Manual

Figure 6-6 TCP/IP Sengs
2. Congure the network parameters.
-
Enable DHCP and the device will get the parameters
automacally.
-
Disable DHCP and set the IPv4 Address, IPv4 Subnet Mask
and IPv4 Default Gateway manually.
3.
Congure the corresponding DNS server parameters.
4. Click Save to enable the sengs.
Port Sengs
Steps
1. Click Network → Basic
Sengs → Port to enter the sengs
page.
Figure 6-7 Port
Sengs
2. Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any
port No. which is not occupied.
HTTPS Port
The default port number is 443, and it can be changed to any
port No. which is not occupied.
RTSP Port
The default port number is 554.
Server Port
The default server port number is 8000, and it can be
changed to any port No. ranges from 2000 to 65535.
41

HIKVISION DS-KD-M Specifications

General

Product type	Card reader
Mounting type	Surface
Product color	Black
Brand compatibility	Hikvision
International Protection (IP) code	IP65
Package weight	421 g
Quantity per pack	1 pc(s)
Storage temperature (T-T)	10 - 95 °C
Operating temperature (T-T)	-40 - 55 °C
DC input voltage	12 V
Sustainability certificates	REACH, RoHS, WEEE

Weight and Dimensions

Depth	33.7 mm
Width	98.5 mm
Height	100 mm
Weight	160 g