Steps
1. Click Event → Basic Event → Event Linkage to enter the
sengs page.
Figure 6-17 Event Linkage
2. Select the Major Type as Device Event or Door Event.
3. Select the type of the Normal Linkage for the event.
4. Click Save to enable the sengs.
6.4.7 Schedule
Sengs
You can create call schedule, or else the device will call indoor
staon all day by default.
Steps
1. Click Schedule → Video Intercom → Call Schedule .
2. Click the next row below Enable Indoor
Staon All Day by
Default.
3. Enter Schedule Name.
4. Select Call Type.
5. Set Weekly Schedule.
1) Click Weekly Schedule.
48