HIKVISION DS-KD-M User Manual

3. Congure the video parameters.
Stream Type
Select the stream type to main stream or sub stream.
Video Type
Select the stream type to video stream, or video & audio
composite stream. The audio signal will be recorded only
when the Video Type is Video & Audio.
The video type is video & audio read only by default.
Resoluon
Select the resoluon of the video output.
Bitrate Type
Select the bitrate type as constant or variable.
Video Quality
When bitrate type is selected as Variable, 6 levels of video
quality are selectable.
Frame Rate
Set the frame rate. The frame rate is to describe the
frequency at which the video stream is updated and it is
measured by frames per second (fps). A higher frame rate is
advantageous when there is movement in the video stream,
as it maintains image quality throughout.
Max. Bitrate
Set the max. bitrate from 32 to 16384 Kbps. The higher value
corresponds to the higher video quality, but the
beer
bandwidth is required.
Video Encoding
The device supports H.264.
I Frame Interval
Set I Frame Interval from 1 to 400.
4. Click Save to save the sengs.
Audio Parameters
Steps
1. Click Video/Audio → Audio to enter the sengs page.
Figure 7-11 Audio Sengs
2. Congure the stream type and the audio encoding type.
64

HIKVISION DS-KD-M Specifications

General

Product type	Card reader
Mounting type	Surface
Product color	Black
Brand compatibility	Hikvision
International Protection (IP) code	IP65
Package weight	421 g
Quantity per pack	1 pc(s)
Storage temperature (T-T)	10 - 95 °C
Operating temperature (T-T)	-40 - 55 °C
DC input voltage	12 V
Sustainability certificates	REACH, RoHS, WEEE

Weight and Dimensions

Depth	33.7 mm
Width	98.5 mm
Height	100 mm
Weight	160 g