EasyManuals Logo
Home>HIKVISION>Intercom System>DS-KD8102

HIKVISION DS-KD8102 Quick Start Guide

HIKVISION DS-KD8102
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Video Intercom Door Station·Quick Start Guide
28
4.3 Edit Network Parameters
Purpose:
Network connection is mandatory for the use of door station.
Steps:
5. Go to the configuration mode.
1) Hold down the * key and the # key for 2s to enter the admin password page.
2) Enter the admin password, and press the # key.
Figure 4-3 Admin Password Page
The default admin password is 888999.
6. Enter the network parameters settings page.
1) Press the numeric keys 4 and 6 to switch to the network configuration page.
Figure 4-4 Network Configuration Page
2) Press the # key to enter the network parameters settings page.
With the private SIP protocol, you should set IP address, sub mask, gateway, SIP IP,
main IP, and center IP for the door station.

Other manuals for HIKVISION DS-KD8102

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KD8102 and is the answer not in the manual?

HIKVISION DS-KD8102 Specifications

General IconGeneral
BrandHIKVISION
ModelDS-KD8102
CategoryIntercom System
LanguageEnglish

Related product manuals