HIKVISION DS-KV6113-WPE1 User Manual

Video Intercom Villa Door Station User Manual
30
3. Click Draw Area. Click and drag the mouse on the live video to draw a motion detection area.
Click Stop Drawing to finish drawing one area. Click Save to save the settings.
Clear Area
Click Clear All to clear all of the areas.
Adjust Sensitivity
Move the slider to set the sensitivity of the detection.
4. Click Arming Schedule to edit the arming schedule.
5. Click on the time bar and drag the mouse to select the time period. Click Save to save the
settings.
Delete Schedule
Click Delete to delete the current arming schedule.
6. Click Linkage Method to enable the linkages.
Notify Security Center
Send an exception or alarm signal to the remote management software when an event
occurs.
7. Click Save to enable the settings.
Event Linkage
Steps
1. Click Event → Basic Event → Event Linkage to enter the settings page.

HIKVISION DS-KV6113-WPE1 Specifications

General

Product type	Camera module
Product color	Black
Brand compatibility	Hikvision
Operating temperature (T-T)	-40 - 55 °C

Weight and Dimensions

Depth	27 mm
Width	65 mm
Height	138 mm
Weight	265 g