HIKVISION DS-KV8102-IM User Manual

Video Intercom Door Station·User Manual
34
 After adding master station IP Address, the linkage between indoor station and
master station can be realized.
 After adding the door station IP Address, the video intercom between indoor
stations of same building can be realized.
 After adding SIP Server Address IP, the video intercom of same community: video
intercom between indoor stations of different building, calling indoor station from
outer door station and video intercom between management center and indoors.
 After adding management center IP Address, the events can be uploaded to the
management center.
 For indoor extension, only parameter about the main indoor station should be
configured.
Advanced Settings
Steps:
1. Click the Advanced Settings button to enter the advanced network settings interface.
Figure 7-30 Advanced Settings
2. Enter the DNS server addresses.
3. Click the Save button to enable the advanced network settings.
7.4.4 Video Display
Steps:
1. Click the Video Display button to enter the video parameters interface.

HIKVISION DS-KV8102-IM Specifications

General

Color	Yes
Video codecs	H.264
Certification	FCC, IC, CE, C-TICK, ROHS, REACH, WEEE
Number of buttons	1 buttons
Connectivity technology	Wired
Sustainability certificates	RoHS
Voice codecs	G.711u
Proper use	Outdoor
Product color	Aluminum
International Protection (IP) code	IP65
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, RTSP
Indoor unit included	No
Operating system installed	Linux
Operating relative humidity (H-H)	10 - 90 %
Door station operating temperature (T-T)	-40 - 70 °C
Outdoor unit power type	AC/DC
Power consumption (typical)	12 W
LED type	IR
Megapixel	1.3 MP
Sensor type	CMOS
Maximum frame rate	25 fps
Maximum video resolution	1280 x 720 pixels

Weight and Dimensions

Depth	33 mm
Width	100 mm
Height	182 mm
Door station dimensions (WxDxH)	100 x 33 x 182 mm