EasyManuals Logo
Home>HIKVISION>Intercom System>DS-KV8202-IM

HIKVISION DS-KV8202-IM User Manual

HIKVISION DS-KV8202-IM
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Video Intercom Door Station·User Manual
28
After editing the password of device, click button from the device list, the
added device will not be there. You should add the device again with new
password to operate the remote configuration.
RS485
Click the RS485 button to enter the RS485 setting interface. You can view and edit the
RS485 parameters of the device.
When use RS-485 interface to connect the door station and the card reader, you should
set the bitrate as 19200, and set the working mode as Card Reader.
When use RS-485 interface to connect the door station and the elevator controller, you
should set the bitrate as 19200, and set the working mode as Elevator Control.
Figure 7-21 RS-485
7.4.2 Video Intercom
Click the Video Intercom button on the remote configuration interface to enter the
video intercom parameters settings: Device Number Configuration, Time Parameters,
Password, Zone Configuration, IP Camera Information, and Volume Input and Output
Configuration, and so on.
Device ID Configuration
Steps:
1. Click the ID Configuration button to enter device ID configuration interface.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KV8202-IM and is the answer not in the manual?

HIKVISION DS-KV8202-IM Specifications

General IconGeneral
ColorYes
Video codecsH.264
CertificationFCC, IC, CE, C-TICK, ROHS, REACH, WEEE
Number of buttons2 buttons
Connectivity technologyWired
Sustainability certificatesRoHS
Voice codecsG.711u
Megapixel1.3 MP
Sensor typeCMOS
Maximum frame rate25 fps
Maximum video resolution1280 x 720 pixels
Proper useOutdoor
Product colorAluminum
International Protection (IP) codeIP65
LED typeIR
Outdoor unit power typeAC/DC
Power consumption (typical)12 W
Operating relative humidity (H-H)10 - 90 %
Door station operating temperature (T-T)-40 - 70 °C
Operating system installedLinux
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
Ethernet LAN (RJ-45) ports1
Supported network protocolsTCP/IP, RTSP
Indoor unit includedNo
Weight and Dimensions IconWeight and Dimensions
Depth33 mm
Width100 mm
Height182 mm
Door station dimensions (WxDxH)100 x 33 x 182 mm

Related product manuals