EasyManuals Logo
Home>HIKVISION>Intercom System>DS-KV8202-IM

HIKVISION DS-KV8202-IM User Manual

HIKVISION DS-KV8202-IM
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Video Intercom Door Station·User Manual
31
2. Set the negative floor.
3. Select the interface type: RS-485 or Network Interface.
If you select RS-485, please make sure you have connected the door station to the
elevator controller with RS-485 wire.
If you select Network Interface, please enter the elevator controllers IP address, port
No., user name, and password.
4. Enable the elevator control.
Up to 4 elevator controllers can be connected to one door station.
Up to 10 negative floors can be added.
Make sure the interface types of elevator controllers, which are connected to the
same door station, are consistent.
IO Input and Output
Step:
1. Click the I/O Input and Output button to enter the I/O input and output interface.
Figure 7-25 IO Input/Output Configuration
2. Select I/O input No., input mode, output No., and output mode.
3. Click the Save button to enable the settings.
For door station (V series), there are 4 I/O Input Terminals, corresponding to
SENSOR interfaces (S1, S2, S3, S4) of door station.
For door station (D series and V series), there are 4 I/O Output Terminals.
Terminal 1~2 correspond to DOOR interfaces (NO1/COM1/NC1; NO2/COM2/NC2)
of door station. You can enable/disable IO Out by selecting from the dropdown list.
Terminal 3~4 correspond to interfaces of ALARM OUT (AO1+, AO1-; AO2+, AO2-).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KV8202-IM and is the answer not in the manual?

HIKVISION DS-KV8202-IM Specifications

General IconGeneral
ColorYes
Video codecsH.264
CertificationFCC, IC, CE, C-TICK, ROHS, REACH, WEEE
Number of buttons2 buttons
Connectivity technologyWired
Sustainability certificatesRoHS
Voice codecsG.711u
Megapixel1.3 MP
Sensor typeCMOS
Maximum frame rate25 fps
Maximum video resolution1280 x 720 pixels
Proper useOutdoor
Product colorAluminum
International Protection (IP) codeIP65
LED typeIR
Outdoor unit power typeAC/DC
Power consumption (typical)12 W
Operating relative humidity (H-H)10 - 90 %
Door station operating temperature (T-T)-40 - 70 °C
Operating system installedLinux
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
Ethernet LAN (RJ-45) ports1
Supported network protocolsTCP/IP, RTSP
Indoor unit includedNo
Weight and Dimensions IconWeight and Dimensions
Depth33 mm
Width100 mm
Height182 mm
Door station dimensions (WxDxH)100 x 33 x 182 mm

Related product manuals