HIKVISION HIKMICRO CHEETAH Series User Manual

5
English
1. Appearance (Page 1 – A)
Component & Interface
No.
Component
Function
1
Lens Cover
Protect the lens.
2
Focus Ring
Adjust the sight view.
3
Power Key
● Press: standby mode/wake up device
● Hold: power on/off
4
Mode Key
● Press: enable/disable PIP
● Hold: switch display modes
5
Wheel
● Press: start/stop recording
● Hold: menu operation
● Rotate: switch digital zoom
6
Fixing Ring
Fix the eyepiece.
7
Diopter Adjustment
Ring
Adjust the dioptric correction.
8
Eyepiece
The eye end of the device to view the
target.
9
Data Exchange
Interface
Connect the device to power supply or
transmit data with a type-C cable.
10
Infrared Light
Increase ambient brightness in dark
environment
11
Battery
Compartment
Install the battery in it.
4 + 5
Laser Key + Wheel
Press to capture snapshots.
2. Install Battery (Page 2 – B)
Steps
1. Turn the battery cover anticlockwise to loosen it.

HIKVISION HIKMICRO CHEETAH Series Specifications

General

Brand	HIKVISION
Model	HIKMICRO CHEETAH Series
Category	Digital Camera
Language	English