HIKVISION iDS-2CD7046G0-AP Quick Start Guide

iDS-2CD7046G0-AP Network Box Camera Quick Start Guide
QSG iDS-2CD7046G0-AP 022321NA 13
2.3.3 Mounting Type I Housing
Steps
1. Screw the camera to housing mounting plate.
Figure 10, Install Camera to Mounting Plate
2. Screw the mounting plate together with the camera back to the housing.
NOTE: Push the camera as close to the window as possible.
Figure 11, Install Camera to Housing
3. Connect and route cables through the cable outlet of the housing.
1) For network, alarm input and output, and audio input and output, plug corresponding plugs to the
rear panel of the camera. See Figure 1-1.
2) For power supply and RS-485, see the following figure.
Window
Cable Outlet

HIKVISION iDS-2CD7046G0-AP Specifications

General

Brand	HIKVISION
Model	iDS-2CD7046G0-AP
Category	Security Camera
Language	English