HIKVISION iDS-2CD9396-AIS Quick Start Guide

Network Traffic Camera • Quick Start Guide
14
Chapter 4 Network Connection

You shall acknowledge that the use of the product with Internet access might be under
network security risks. For avoidance of any network attacks and information leakage,
please strengthen your own protection. If the product does not work properly, please
contact with your dealer or the nearest service center.

To ensure the network security of the camera, we recommend you to have the camera
assessed and maintained termly. You can contact us if you need such service.
Before you start:
To view and configure the camera via a LAN, you need to connect the camera in the same subnet
with your computer, and install the SADP to search and change the IP address of the camera.
Wire over the LAN
The following figures show the two ways of cable connection of a camera and a computer.
 Directly connect the camera to the computer with a network cable.
 Set camera over the LAN via a switch or a router.
Network Cable
Computer
Traffic Camera
Direct Connection

HIKVISION iDS-2CD9396-AIS Specifications

General

Brand	HIKVISION
Model	iDS-2CD9396-AIS
Category	Security Camera
Language	English