Network Video Recorder Quick Start Guide
35
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Step 2 Click OK to save the password and activate the device.
Step 3 When the device is activated, the system pops up the message box to remind you to properly
keep the password. And you can click OK to continue to export the GUID file for the future
password resetting.
Figure 3-2 Properly Keep Password Remind
If Admin’s password is modified, the following menu pops up. Optionally, click Yes to duplicate the
password to IP cameras that are connected with default protocol.
3.3 Configure Unlock Pattern for Login
For the admin user, you can configure the unlock pattern for device login.
Step 1 After the device is activated, you can enter the following interface to configure the device
unlock pattern.
Step 2 Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the
pattern is done.
To Next Page
Loading...
Need help?
General
