English
5
DO NOT touch the heat dissipation component to avoid burns.
DO NOT expose the device to extremely hot, cold, or humidity
environments. For temperature and humidity requirements, see device
specification.
If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
If the device is abnormal, contact the store you purchased it or the
nearest service center. DO NOT disassemble or modify the device in any
way (For the problems caused by unauthorized modification or
maintenance, the company shall not take any responsibility).
Keep all packaging after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may result
in damage to the device and the company shall not take any
responsibility.
Please enforce the protection for the personal information and the data
security as the device may be confronted with the network security
problems when it is connected to the Internet. Contact us if network
security risks occur.
Please understand that you have the responsibility to configure all the
passwords and other security settings about the device, and keep your
user name and password.
DO NOT touch the lens with fingers directly in case the acidic sweat of
the fingers erodes the surface coating of the lens.
DO NOT aim the lens at the strong light such as sun or incandescent lamp.
The strong light can cause fatal damage to the device.
DO NOT disconnect the power during formatting, uploading, and
downloading. Or files may be damaged.
Panel and Cable Overview
To Next Page
Loading...
Need help?
General
