Need help?Do you have a question about the Hill-Rom Advanta P1600 and is the answer not in the manual?
General| Brand | Hill-Rom |
|---|---|
| Model | Advanta P1600 |
| Category | Medical Equipment |
| Language | English |
Describes the CPR Release function for quickly lowering the head section in emergencies.
Details the electrical power system's insulation, testing, supply cord, and UL approval.
Details the bed controls located on head end siderails and the footboard control panel.
Details how to activate the nurse call feature and the associated indicators.
Explains the integrated PPM system for patient motion monitoring, modes, and settings.
Details the four modes of operation for the PPM system: Position, Exiting, Out of Bed, and Off.
Details the Advanta Bed scale's accuracy, range, display, and control switches.
Explains the function of various indicator lights on the footboard control panel and siderails.
Provides safety guidelines for working with the bed in high positions and during service.
Outlines the procedure for troubleshooting, starting with initial actions and function checks.
Guides through mechanical, electrical, and pneumatic subsystem checks to identify malfunctions.
Explains how the Service Required LED flashes indicate specific faults and directs to troubleshooting tables.
Details a test procedure to check the operation of footboard control panel switches and LEDs.
Describes a self-diagnostic test for the air system's drive circuitry, valves, and pump.
Outlines an independent diagnostic test for the air system's relays, valves, and pump.
Provides steps to diagnose and resolve issues when the head section hilow function does not lower.
Guides through troubleshooting steps when the foot section hilow function does not lower.
Details steps for diagnosing and resolving issues when the head section hilow function does not go up.
Provides steps to diagnose and resolve issues when the foot section hilow function does not go up.
Guides through troubleshooting steps when the knee section does not lower.
Details steps for diagnosing and resolving issues when the knee section does not go up.
Provides steps to diagnose and resolve issues when the head section does not lower.
Details steps for diagnosing and resolving issues when the head section does not go up.
Addresses issues when the head (hilow) section does not lower during Trendelenburg activation.
Addresses issues when the head (hilow) section does not raise during Reverse Trendelenburg activation.
Addresses issues when the foot (hilow) section does not lower during Reverse Trendelenburg activation.
Addresses issues when the foot (hilow) section does not raise during Trendelenburg activation.
Guides through diagnosing and resolving issues with the night light not functioning.
Provides steps to diagnose and fix slow air leaks in the ZoneAire® Sleep Surface system.
Guides through diagnosing and fixing continuous run errors in the ZoneAire® Sleep Surface system.
Addresses issues related to a triac short error in the ZoneAire® Sleep Surface system.
Guides through diagnosing and fixing ZoneAire® Sensor EEPROM errors.
Provides steps to diagnose and fix errors related to disconnected ZoneAire® Sleep Surface mattresses.
Guides through diagnosing and fixing ZoneAire® Triac Open errors.
Details steps to diagnose and resolve ZoneAire® LON communication errors.
Provides steps to diagnose and fix issues where a key is stuck in a closed position.
Guides through troubleshooting steps when the ZoneAire® Sleep Surface is not functioning.
Details how to diagnose and resolve errors displayed on the bed scale.
Provides steps to diagnose and fix issues when the Patient Position Monitor (PPM) is not functioning.
Guides through diagnosing and resolving issues where the PPM system beeps and flashes LEDs.
Explains how to use the SideCom® tester to check siderail communication system functions.
Explains the logic control board's role as the heart of the articulation system and its inputs/outputs.
Describes the power supply system's subassemblies, safety features, and regulator circuits.
Explains the PPM system's power supply, piezo speaker, watchdog timer, and force sensing resistors.
Explains how to remove and install the ZoneAire® Sleep Surface mattress.
Provides instructions for removing and replacing the sensor control P.C. board.
Details the procedures for removing, replacing, and adjusting the head limit switch.
Explains the removal, replacement, and adjustment of the hilow head limit switch.
Details the procedures for removing, replacing, and adjusting the knee limit switch.
Explains how to adjust the CPR release handle for proper cable operation.
Provides instructions for removing and replacing the CPR limit switch.
Explains the procedures for removing and replacing the hilow foot limit switch.
Explains how to remove and replace the Patient Position Monitor (PPM) sensor.
Provides steps for calibrating the bed scale using specific weights and button sequences.
Recommends annual preventive maintenance (PM) for ensuring operative life and minimizing downtime.
Provides a schedule of functions and procedures for regular preventive maintenance.
Offers a checklist to document and track preventive maintenance activities and costs.
Recommends preventive maintenance for the ZoneAire® Sleep Surface to ensure long operative life.
To Next Page