12
Turning the TV on for the First Time
Turning the TV on for the First Time
1. Connect the mains cable to the mains socket after you have completed all the
connections.
2. The first time you turn the TV on, it will go straight into the Installation Guide.
3. Press the [
/ / < / >] buttons to navigate the menu and change the settings.
Press the [OK] button to confirm.
Language Select your desired language to be displayed on the menu.
Location Select the location where you will operate the TV.
Time Zone Select the local time zone according to your region.
Disclaimer
Your use of this device and all related services is governed by the
End User License Agreement and relative policies. Please review
these documents carefully and make sure that you have read
and agree to the provisions of the End User License Agreement.
Network
Connection
If your TV does not automatically detect an Ethernet connection,
then use a wireless network, select your network from the list that
displays, also you can add a hidden network. When you’re done,
move to the next screen.
Success
Congratulations, you have finished the Wizard setup.
Press "Finish" to use your TV, for retailers press "Store Mode".
To Next Page
Loading...
Need help?
General
