8
STEP 3. Establish a Network Connection
1. Press
the
[
]
button
on the remote control,
press
[
˅
]
button
to select Settings and then press
[
OK
]
to enter the Settings menu
.
2. Select
Network → NetworkConguration
.
AN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
Establish a wired network connection
Automatically obtain an IP address
1. Select
Wired LAN. The TV will automatically obtain an IP address and connect to the network.
NOTE: The default option of IP Settings Mode is DHCP.
2. If the connection fails then "
Disconnected" will display for the Ethernet status. Retry or enter the IP Settings, select Manual to input
the information again.
Manually enter the IP Settings
1. Select
Manual.
2. Enter the IP Address, Netmask, Gateway, DNS Server 1 and DNS Server 2 in the menu. Next, select
Connect.
To Next Page
Loading...
Need help?
General
