Name: Hisense 55A6BG
Brand: Hisense
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Installing the Stand or Wall mount bracket

1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the

TV or scratching to the screen.

2. Take out the 2 stands from the accessory bag and then insert the stands into the

bottom slots of the TV.

3. Secure the stands to the TV with the 4 screws in accessory tightly.

Installing the stand

CAUTION

Be sure to disconnect the AC power cord before installing a stand or wall mount

brackets.

The display on your TV is fragile. Make sure the TV screen is not scratched or

damaged by hard objects or from pressure.

After the installation is completed, make sure the TV is steady on a table or firmly

attached to a wall mount, before removing all protective film, if any.

Follow the illustrations and textual instructions below to complete the installation steps:

Screws:

M4×16 (43")

M4×12 (50"/55")

Base Stand

1. Carefully place your TV face-up on a soft, flat surface to prevent damage to the TV

or scratching to the screen.

2. Take out the 2 stands from the accessory bag and then insert the stands into the

bottom slots of the TV.

3. Secure the stands to the TV with the 4 screws in accessory tightly.

43"/50"/55"

58"

Questions and Answers:

Need help?

Do you have a question about the Hisense 55A6BG and is the answer not in the manual?

Hisense 55A6BG Specifications

General