Hisense RT33D6AAE User Manual

The side at which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site requires.
Tools you will need:
. 8mm socket driver
.
cross-shaped screwdriver
Note: Before this step, you should lay the refrigerator
on it’s back in order to gain access to the base, you
should rest it on soft foam packaging or similar
material to avoid damaging the cooling pipes at the
rear of the refrigerator.
.
Putty knife or thin-blade screwdriver
2. open the screw hole cove and the upper
hinge cover which is at the top right corner of
the refrigerator.
upper hinge
cover (right)
1. Stand the refrigerator, open the upper
door and remove the things in the door and
close it.
3.Unscrew the special flange self-tapping
screws which are used for fixing the right
upper hinge part by a 8mm socket driver
or a spanner(please support the upper
door with your hand when doing it ).
right upper hinge part
special flange
selftapping screws
5.Remove upper door and place it on
smooth surface with panel upwards.
6. Loose screws used to fix middle hinge
and remove middle hinge. Then turn middle
hinge by 180. Take washer on axis and put
it on another end. Place it well for use.
7. Remove lower door and place panel
upwards on smooth surface.
8. Change screw hole covers on middle
cover plate from left to right (as shown in
figure below).
Front foot fixed board
Self tapping screws
Adjustable bottom feet part
Lower hinge partΰrightα
9. Use the
Screw out lower
8mm
socket driver to
remove lower hinge
part and front foot
fixed board. Then
4.Remove the right upper hinge part and
, the screw hole cover place them on
smooth surface.
Note: washer may
stick to lower door.
washer
A
jdustable bottom feet
screw hole cover
. 7mm wrench
Caution㧦
To avoid to injury yourself and/or property,
we recommend someone assist you during
the door reversal process.
.Ensure the Appliance is unplugged and
empty.
.Following steps are generally
recommended
and adjustable bottom feet, change it to the near
hole site, and then screw up and mount washer.
Changing the door from the right side to the left.

Hisense RT33D6AAE Specifications

General

Door hinge	Right
Product color	Black, Stainless steel
Reversible doors	Yes
Appliance placement	Freestanding
Star rating	-
Freezer position	Top-placed
Freezing capacity	- kg/24h
Freezer net capacity	28.3 L
Freezer gross capacity	- L
Freezer number of shelves/baskets	1
Fresh zone compartment	No
Noise level	43 dB
Certification	ETL, CEC
Total net capacity	93.4 L
Connected load	- W
Annual energy consumption	322 kWh
Fridge net capacity	65.1 L
Fridge number of shelves/baskets	3
Package depth	574 mm
Package width	514 mm
Package height	887 mm
Package weight	30500 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	547 mm
Width	475 mm
Height	857 mm
Weight	26200 g