Hisense Y-H1 User Manual

SMART button is ineffective in SUPER mode.
Press the SMART button, the unit enters SMART mode(fuzzy logic operation) directly regardless of
the unit is on or off. In this mode, temperature and fan speed are automatically set based on the
actual room temperature.
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, a decrease or rise of up to 7 ℃ can be set with the remote controller if you still
feel uncomfortable.
Operation instructions
5
SMART mode
Indoor temperature
Indoor temperature
Target temperature
Target temperature
Below T-3℃
Over T+3℃
T+3℃ or below
T
T
T
T
T
Over T+3℃
T-3℃ T+3℃≦Tindoor≦
Operation mode
Operation mode
HEATING
FAN ONLY
FAN ONLY
COOLING
COOLING
Operation mode and temperature are determined by indoor temperature
Heat pump models
Cooling only models
CLOCK button
You can adjust the real time by pressing CLOCK button, then
using and buttons to get the correct time, press
CLOCK button again the real time is set.
MODE
CLOCK
TIMER ON
TIMER OFF
DIMMER
SMART
MUTE
TEP SWITCH
SLEEP
I FEEL
SOFT
SWING
SWING
Your feeling
What you can do in SMART mode
button
adjustment procedure
Uncomfortable
because of
unsuitable air
flow volume.
Uncomfortable
because of
unsuitable flow
direction.
Uncomfortable
because of
unsuitable flow
direction.
Indoor fan speed alternates among
High, Medium and Low each time this
button is pressed.
Press it once, the vertical adjustment
louver swings to change vertical airflow
direction. Press it again, swings stops.
Press it once, the horizontal adjustment
louver swings to change horizontal airflow
direction. Press it again, swings stops.
SWING
SWING

Hisense Y-H1 Specifications

General

Brand	Hisense
Model	Y-H1
Category	Remote Control
Language	English