53
On-Screen Display
Channel List
Auto Channel Scan
Signal Meter
Channel Manager
Move
SEL Return
Channel List
Channel Manager
Move Return
FAV CH# Scan Lock ID
3-1 OnO -------
4On O -------
5On O -------
6On O -------
7On O -------
8On O -------
9On O -------
10 On O -------
No Info.
--:-- AM- --:-- AM
INFO Detail
OR
Channel List
This function allows you to review which channels are
labeled (CH ID), which have been added to CHANNEL
MEMORY (SCAN), which are protected by LOCK and
which are your FAVORITE (FAV) CHANNELS.
1. Use the CURSOR PAD to navigate the Channel List.
2. Press the SELECT button to select ON or OFF on the
SCAN and LOCK columns.
3. To select LOCK column, input the access code.
(Default access code: 0000)
4. Press the CHANNEL WHEEL button to set or remove
the FAVORITE channel settings.
5. Press the EXIT button to return to normal viewing.
NOTE: 1. When a CableCARD is installed, the Channel List will be dependent on channels agreed
upon by you and your cable operator.
2. The Channel List cannot be updated by only changing the cable source. Auto Channel Scan must
be performed for the Channel List to be updated.
Channel Manager
To Next Page
Loading...
Need help?
General