Hitachi 40C311 User Manual

8
How to attach the stand
How to remove the stand
When you transport this product, remove the stand and pack it at against the back of the
unit in the carton. To remove the stand, perform the above steps in reverse order.
When you mount the TV on the wall, remove both stands. To disconnect the stand remove
the screws from the bottom of TV.
Note: Before wall-mounting, please carefully check the location of the TV’s mounting holes.
NOTE:
• Assure the AC cord is not connected to an AC outlet.
• Before beginning this process, make sure that you have a clean, safe, and cushioned
space to work at to avoid any damage to the unit.
• Do not touch or press the LCD screen, the glass might break under pressure.
• The below assembly illustration is based on the 40C311 model.
Carefully place the TV screen face-down on a clean, cushioned surface.
2 Attach the stands to the bottom of the TV by inserting the guide posts into the slits at
the bottom of the TV as shown in Fig.1.
3 Secure the stands to the TV by using the supplied 4 screws as shown in Fig. 2.
 







Hitachi 40C311 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	39.5 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
LED backlighting type	Direct-LED
Supported video modes	1080p
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
3D	No
Image formats supported	JPEG
Composite video in	1
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Tuner type	Analog & digital
Analog signal format system	NTSC
Digital signal format system	ATSC
Firmware upgradeable via	USB
On Screen Display (OSD) languages	ENG, ESP, FRE
RMS rated power	16 W
Number of speakers	2
Power consumption (standby)	- W
Product color	Black
Panel mounting interface	200 x 200 mm
Cables included	AC
Package type	Box
Package depth	136.525 mm
Package width	971.55 mm
Package height	596.9 mm
Package weight	8981 g

Weight and Dimensions

Depth (with stand)	228.6 mm
Width (with stand)	901.7 mm
Height (with stand)	577.85 mm
Weight (with stand)	6395 g
Depth (without stand)	66.675 mm
Height (without stand)	511.175 mm
Weight (without stand)	6214 g