EN 10
Remote control
Press to turn the TV’s power On/Standby.
INPUT
Calls the input source selection menu.
(Numeric buttons) Use to enter channel numbers.
Use to enter a digital channel with a sub-channel. Enter the main
channel, then press dash ( ), enter the sub-channel, and then
press OK to conrm your entry.
Press to display the electric program guide.
Press to call the main menu OSD or press to return to the previous
menu.
Press to exit the On-Screen menu.
(Cursor Up/Down/Left/Right buttons) Use to navigate and select
menu functions.
Press to conrm or select functions for the On-Screen menu.
Press to call the ASPECT selection OSD.
Repeatedly press to set the sleep timer from 5 to 240 minuets. To
cancel the sleep timer, press SLEEP until “O” appears.
Press to call the Picture Mode on-screen display menu.
RETURN Return to the previous channel in TV mode.
(Volume UP/DOWN) Increase or decrease the TV’s volume.
Press to display information about the TV status.
MUTE (MUTE) Reduces the TV’s volumes to its minimum level. Press
again to restore the volume.
Press to change the channel of the TV.
Press to access the Favorite Channel list.
Press to go to the USB Inputs.
Press to change the audio language.
C.C. Press to set Closed Caption to “CC O”, “CC On Mute” or “CC On”.
(Previous) Press to select the previous chapter
(Play/Pause) Press to start, pause or resume viewing.
(Stop) Press to stop viewing.
(Next) Press to select the next chapter.
To Next Page
Need help?
General
