Hitachi C 10FR User Manual

– 23 –
English
PUSH STICK CONSTRUCTION
●
This is a full-size drawing (actual size)
●
Use good quality plywood or solid wood
●
Use 1/2 in. or 3/4 in. material
●
Push stick MUST be thinner than the width
of material being cut
Drill Hole For
Hanging
Notch To Prevent
Hand From
Slipping
Cut Here To
Push 1/2 in.
Wood
Cut Here To
Push 3/4 in.
Wood

Hitachi C 10FR Specifications

General

Brand	Hitachi
Model	C 10FR
Category	Saw
Language	English