Hitachi C8U - User Manual

C 7U • C 8U
Circular Saw
Kreissäge
Scie circulaire
Sega circolare
Cirkelzaagmachine
Sierra circular
Handling instructions
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
Gebruiksaanwijzing
Instrucciones de manejo
Read through carefully and understand these instructions before use.
Diese Anleitung vor Benutzung des Werkzeugs sorgfältig durchlesen und verstehen.
Lire soigneusement et bien assimiler ces instructions avant usage.
Prima dell’uso leggere attentamente e comprendere queste istruzioni.
Deze gebruiksaanwijzing s.v.p. voor gebruik zorgvuldig doorlezen.
Leer cuidadosamente y comprender estas instrucciones antes del uso.
C 7U

Hitachi C8U Specifications

General

Brand	Hitachi
Model	C8U
Category	Saw
Language	English

Summary

General Operational Precautions

Precautions on Using Circular Saw

Adjusting the Saw Prior to Use

Adjusting the Cutting Depth

Adjusts the depth of cut by moving the base.

Adjusting the Riving Knife

Clamps and adjusts the riving knife to the correct position.

Adjusting the Angle of Inclination

Inclines the saw blade up to a 45° angle relative to the base.

Regulating the Guide

Regulates the cutting position using the guide.

Cutting Procedures

Mounting and Dismounting the Saw Blade

Maintenance and Inspection

Inspecting the Saw Blade

Inspect saw blade for dullness or damage to maintain efficiency.

Inspecting Mounting Screws

Ensure all mounting screws are properly tightened.

Carbon Brush Inspection and Replacement

Check carbon brushes for wear and procedure for replacement.

Motor Maintenance

Ensures the motor winding is protected from damage.

Base and Blade Perpendicularity Adjustment

Adjusts the base and saw blade to a 90° angle.

EC Declaration of Conformity