MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand
their meaning before use.
It is important that you read, fully understand and observe the following safety
precautions and warnings. Careless or improper use of the unit may cause
serious or fatal injury.
Read, understand and follow all warnings and instructions in this manual and on
the unit.
Always wear eye, head and ear protectors when using this unit.
Warning, kickback danger. Be careful of possible sudden and accidental upward
and/or backward motion of the guide bar.
One-handed usage not permitted. While cutting, hold saw fi rmly with both hands
with thumb fi rmly locked around front handle.
Contents
Parts breakdown
WHAT IS WHAT? ...................................................3
WARNINGS AND SAFETY INSTRUCTIONS .........4
SPECIFICATIONS ..................................................7
ASSEMBLY PROCEDURES ..................................8
OPERATING PROCEDURES .................................9
MAINTENANCE ...................................................15
2
English
000BookCS33EBUS.indb2000BookCS33EBUS.indb2 2009/09/0410:24:492009/09/0410:24:49
To Next Page
Loading...
Need help?
General
