--- 14 ---
Part
8-3. Interchangeability
Although the output section and the control valve section are basically common to those of the Model NV 45AB,
most of the parts of the driving section and the magazine section have been newly designed. The parts listed
below are not interchangeable with the Model NV 45AB. (The [Bold] numbers in the descriptions below
correspond to the item numbers in the Parts List.)
NV 45AB2 NV 45AB
Body Ass'y [24]
Gasket (A) [29]
Feeder (A) [70]
The mounting portion of the magazine is
different in shape.
Thickness: 0.5 mm
2 slopes
2.5 mm
(0.1")
The hooks are different in shape.
Grip tape
Mounting portion
of the magazine
is not thickened.
There is a difference.
Thickness: 0.4 mm
1 slope
5 mm
(0.2")
Spare parts will be unified to the
ones for the Model NV 45AB2.
Nose [32]
A protrusion is provided at the mounting
portion of the adjuster.
Mounting portion
of the adjuster
Protrusion
1 pc.
Mounting portion
of the bolt
2 pcs.
No
protrusion
Mounting portion
of the magazine
is thickened.
No difference
Grip rubber
Spare parts will be unified to the
ones for the Model NV 45AB2.
To Next Page
Loading...
Need help?
General
