HOMCOM A90-196 User Manual

CONTROL PANEL
BUTTONS:
[RESET] clears data from selected mode.
• To reset all stored information from previous
workout, press for 3 seconds.
• Does not clear total exercise miles (ODO).
[MODE] selects mode.
• To reset all stored information from previous
workout, press for 3 seconds.
• Does not clear total exercise miles (ODO).
[SET] programs new setting for selected mode.
• To increase setting more quickly, press for 3
seconds. Release and press again to program.
SCAN: Cycles through all functions below. Press [MODE] to make selection.
TIME: Press [RESET] to time workout or [SET] to program a countdown timer. When countdown
reaches 0, alarm will sound. Press any button to silence.
SPEED: Displays estimated KPH.
DIST: Press [RESET] to display distance in miles for current workout or [SET] to program a
countdown from distance goal. When countdown reaches 0, alarm will sound. Press any button
to silence.
CAL: Press [RESET] to display estimated calories expended or [SET] to program a countdown
from calorie goal. When countdown reaches 0, alarm will sound. Press any button to silence.
ODO: Displays total exercise miles of all workouts.
PULSE: Press [RESET] to display heart rate or [SET] to program a target heart rate. User must
hold the heart rate monitor grips on the handle bars for heart rate to display. Whenever target
heart rate is surpassed, alarm will sound. To silence, remove hands from heart rate monitor grips
or press [RESET].
SCAN
TIME
SPEED
DIST
ODO
CAL
PULSE
RESET MODE SET
TIME, DIST, CAL, and PULSE: Default to previous setting
until reset ([RESET]) or programmed with new setting ([SET]).

HOMCOM A90-196 Specifications

General

Brand	HOMCOM
Model	A90-196
Category	Exercise Bike
Language	English