EasyManuals Logo
Home>Homelite>Blower>HBL26BVB

Homelite HBL26BVB User Manual

Homelite HBL26BVB
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Original instructions | English
9
filters.
Use rakes and brooms to loosen debris
before blowing.
In dusty conditions, slightly dampen
surfaces when water is available.
After using blowers or other equipment,
clean up. Dispose of debris properly.
WARNING
Never run the product without the blower/
vacuum tube installed. Failure to follow
these steps could result in possible serious
injuries.
WARNING
Always hold the blower/vacuum away
from your body with the handle in your
right hand when operating as a blower,
keeping clearance between your body and
the product. The mufer side of the blower
should be away from your body. Any
contact with the housing can result in burns
and/or other serious personal injury.
WARNING
Do not place blower on top of or near loose
debris or gravel. Debris may be sucked
into blower intake vent resulting in possible
damage to the product and could result in
serious personal injury.
WARNING
Watch out for children, pets, open windows,
or freshly washed cars, and blow debris
safely away.
USING THE VACUUM
See page 26.
WARNING
Keep the silencer and all hot surfaces of
the blower/ vacuum away from your body.
Failure to do so could result in possible
serious personal injury.
Place the vacuum bag strap over your right
shoulder. Hold the upper handle in your left
hand and the vacuum handle in your right
hand.
Move the blower/vacuum from side to side
along outer edge of the debris. To avoid
clogging, do not place the vacuum tube
directly into the debris pile.
Hold the engine higher than the inlet end of
the vacuum tube.
Always point vacuum tube downhill when
working on a hillside.
To avoid serious injury to the operator or
damage to the unit, do not pick up rocks,
broken glass, bottles, or other similar
objects.
If the vacuum tubes should clog, stop
the engine, ensure impeller blades have
stopped spinning, and disconnect the
spark plug wire before cleaning out the
obstruction.
Remove the vacuum tubes and clear
the debris from the blower fan housing.
Remove the bag and clear the tube. A
small rod or stick may be required to clear
the entire tube length. Ensure that all debris
has been cleared before reassembling the
vacuum tubes.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Homelite HBL26BVB and is the answer not in the manual?

Homelite HBL26BVB Specifications

General IconGeneral
BrandHomelite
ModelHBL26BVB
CategoryBlower
LanguageEnglish

Related product manuals