Page 14 — English
TROUBLESHOOTING
1. Lubricate with silicone spray.
2. Install more string. Refer to String Replacement
earlier in this manual.
3. Pull both strings while pressing button.
4. Remove strings from spool and rewind. Refer to
String Replacement earlier in this manual.
1. Cut tall grass from the top down to prevent
wrapping.
1. Plug in the power cord.
2. Check circuit breaker.
1. Strings are welded to themselves.
2. Not enough string on spool.
3. Strings are worn too short.
4. Strings are tangled on spool.
1. Cutting tall grass at ground level.
1. Power cord is not plugged in or
connection is loose.
2. Household circuit breaker is
tripped.
Strings will not advance when
using the Auto Feed Head:
Grass wraps around driveshaft
housing and string head
Motor fails to start when
switch trigger is depressed.
PROBLEM POSSIBLE CAUSE SOLUTION
CAL
L
1-800-242-4672
www
.homeli
te.com
CALL US FIRST
For any questions about operating or maintaining your product,
call the Homelite
®
Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
To Next Page
Loading...
Need help?
General