Need help?Do you have a question about the Honda 1985 ATC 250R and is the answer not in the manual?
General| Displacement | 246 cc |
|---|---|
| Bore x Stroke | 66.0 mm x 72.0 mm |
| Carburetion | 34 mm Keihin |
| Ignition | CDI |
| Transmission | 5-speed |
| Front Suspension | Telescopic fork |
| Rear Tire | 22 x 11-8 |
| Fuel Capacity | 2.6 gallons |
| Final Drive | Chain |
| Engine Type | 2-stroke single |
| Rear Suspension | Swingarm with single shock |
| Front Brake | Disc |
| Rear Brake | Disc |
| Front Tire | 23 x 8-11 |
Essential guidelines for operating the ATC safely and responsibly.
Recommended gear for rider protection during operation.
Identifies the location of key components on the ATC.
Explains the function of various controls like switches, levers, and pedals.
Details on fuel mixture, valve operation, and tank capacity.
How to check, change, and select transmission oil.
Guidelines for selecting, using, and inspecting engine coolant.
Tire pressure, size, and emergency repair information.
Procedure for adjusting front fork air pressure.
Adjusting rear shock preload, damping, and conditions.
Essential checks to perform before riding the ATC.
Guides for starting the engine and basic riding techniques.
Intervals and tasks for scheduled maintenance.
Adjusting idle speed, air screw, and for altitude/temperature.
How to adjust the clutch lever free play.
Checking brake fluid levels and pad wear.
Procedure for adjusting the parking brake.
How to adjust the throttle cable free play.
Adjusting slack, lubrication, cleaning, and slider wear.
Preparing the ATC for storage and taking it out.
Process for resolving customer satisfaction issues with dealers.
To Next Page