Honda 1989 Prelude User Manual

Provides guidance on how to effectively use the service manual for vehicle maintenance and repair procedures.

Details on identifying and understanding vehicle chassis and engine identification numbers for accurate referencing.

Illustrates the specific locations on the vehicle where chassis and engine identification numbers are stamped or affixed.

Pinpoints the locations of all critical labels, including emission control and caution labels, on the vehicle.

Specifies the correct points on the vehicle chassis for safe lifting and supporting using jacks and stands.

Provides instructions and precautions for safely towing the vehicle, including flat-bed and wheel-lift methods.

Outlines essential steps and precautions to take before commencing any maintenance or repair work on the vehicle.

Explains the meaning of various symbols used throughout the manual for fluid application and service procedures.

Lists and defines abbreviations commonly used in the manual for technical terms and vehicle components.

Lists and describes specialized tools required for various engine maintenance and repair operations.

Details specialized tools necessary for the diagnosis and repair of fuel and emissions control systems.

Lists essential specialized tools for servicing and repairing the manual and automatic transmission systems.

Identifies specialized tools for driveshaft, steering, suspension, brakes, body, and HVAC system servicing.

Enumerate specialized tools and equipment needed for troubleshooting and repairing the vehicle's electrical system.

Provides detailed specifications and service limits for engine cylinder heads, blocks, lubrication, and cooling systems.

Outlines specifications for fuel, emissions, clutch, and manual/automatic transmissions, including performance parameters.

Presents key design specifications including overall dimensions, weight, and detailed body measurements.

A chart detailing measurement points and specifications for frame repair and alignment procedures.

Identifies all lubrication points on the vehicle and specifies the recommended lubricants for each.

Outlines the recommended maintenance schedule based on mileage or time intervals for all major vehicle systems.

Details procedures for performing engine tune-ups, including oil and filter replacement, for optimal performance.

Covers the timing belt system, including its illustrated index, special tools, and replacement procedures.

Provides comprehensive instructions for the safe and correct removal and installation of the engine assembly.

Details the procedures for the replacement of the exhaust pipe and muffler system.

Details component locations, system descriptions, and troubleshooting for carbureted engine fuel and emission systems.

Details component locations, troubleshooting procedures, and system specifics for fuel-injected engines.

Explains how to interpret self-diagnosis LED codes and general troubleshooting steps for PGM-FI systems.

Details the idle control system, including troubleshooting flow charts and component testing for various models.

Focuses on the slow air jet control system, providing inspection and testing procedures for specific models.

Explains the vacuum piston control system, including testing procedures and troubleshooting flow charts.

Covers procedures for adjusting idle speed and mixture for various engine models, including testing steps.

Details testing procedures for the fuel pump and fuel supply system to ensure proper fuel delivery.

Provides troubleshooting flow charts for emission control systems like Air Injection, EGR, and Evaporative Emission Controls.

Illustrates the locations of key components within the automatic transmission system for both carbureted and fuel-injected engines.

Presents the electrical circuit diagrams for the automatic transmission control system.

Offers troubleshooting flow charts and procedures for diagnosing common issues with the automatic transmission.

Details the disassembly, inspection, and reassembly of the automatic transmission's main valve body.

Covers the installation and adjustment procedures for the automatic transmission shift cable to ensure correct gear engagement.

Provides detailed instructions for inspecting and reassembling the brake master cylinder, including component diagrams.

Details the construction and heater door positions for various airflow modes within the heating system.

Illustrates the construction and component locations of the air conditioning system for both LHD and RHD models.

Presents wiring diagrams and troubleshooting flow charts for diagnosing and resolving air conditioning system faults.

Diagrams showing the locations of relays and control units within the engine compartment and dashboard.

Illustrates the routing of ground wires and main wire harnesses throughout the vehicle's chassis and engine bay.

Details the power distribution and ground identification circuits for various vehicle systems.

Provides procedures for testing the vehicle battery, including load testing and charge capacity checks.

Covers the component locations, description, circuit diagram, and troubleshooting for the cooling fan control system.

Details component locations, description, and unit removal procedures for the stereo sound system.

Outlines component locations, circuit diagrams, and troubleshooting for the power window system.

Covers the cruise control system, including clutch switch testing and general operation.