The Seat Belt System and How It Works
Wearing the Lap Belt
1. Pull the latch plate across your
hips and insert it into the buckle
marked CENTER.
If the belt is too short, hold the
latch plate at a right angle and pull
it to extend the belt while sliding
the tail toward the latch. Insert the
latch plate into the buckle.
2. Position the belt as low as possible
across your hips and pelvic bones,
not across your stomach. Pull the
loose end of the belt to adjust for a
snug but comfortable fit.
To unlatch the belt, push the red
PRESS button on the buckle.
Driver and Passenger Safety
To Next Page
Loading...
Need help?
General
