Windshield Wipers
3. Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
4. Examine the new wiper blades. If
they have no plastic or metal rein-
forcement along the back edge,
remove the metal reinforcement
strips from the old wiper blade and
install them in the slots along the
edge of the new blade.
5. Slide the new wiper blade into the
holder until the tabs lock.
6. Slide the new blade assembly onto
the wiper arm. Make sure it locks
in place.
7. Lower the wiper arm down against
the windshield.
Maintenance
BLADE
BLADE
REINFORCEMENT
To Next Page
Loading...
Need help?
General
