＋
◎
▽
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
If it takes several pushes on the
button to lock or unlock the doors,
replace the battery as soon as
possible.
Battery type: CR2025
To replace the battery, remove the
round cover on the back of the
transmitter by turning it
counterclockwise with a coin. Insert
a new battery with the side facing
up. Reinstall the cushion ring. Align
the mark on the cover with the
mark on the transmitter. Set
the cover in place, and turn it
clockwise.
Replacing the Transmitter
Battery
Remote Transmitter
72
ROUND
COVER
CUSHION
RING
BATTERY
Open
Close
０４／０８／０４ １４：３３：３８ ３１Ｓ５Ｐ６４０ ００７５
To Next Page
Loading...
Need help?
General
