To open or close the moonroof
partially, pull or push the moonroof
switch lightly to the first detent and
hold it. The moonroof will stop when
you release the switch.
Turn the ignition switch to the ON
(II) position before operating the
moonroof switch on the ceiling
console.
To open the moonroof fully, pull
back the moonroof switch firmly.
The moonroof opens all the way. To
stop the moonroof from opening
fully, briefly move the switch in
either direction.
To tilt the moonroof, push the center
of the moonroof switch straight up.
To stop the moonroof from tilting
fully open, push the moonroof switch
forward.
If equipped
Moonroof
102
MOONROOF SWITCH
Tilt
Close
Open
０８／０７／０９ １１：４８：０５ ３１ＳＮＡ６３０ ０１０７
To Next Page
Loading...
Need help?
General
