EasyManuals Logo

Honda 2010 Pilot User Manual

Honda 2010 Pilot
575 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #479 background imageLoading...
Page #479 background image
If the reserve tank is completely
empty, you should also check the
coolant level in the radiator.
If the coolant level in the reserve
tank is at or below the MIN line, add
coolant to bring it up to the MAX line.
Inspect the cooling system for leaks.
Always use Honda Long-life Anti-
freeze/Coolant Type 2. This coolant
is pre-mixed with 50 percent
antifreeze and 50 percent distilled
water. Never add straight antifreeze
or plain water.
If Honda antifreeze/coolant is not
available, you may use another
major-brand non-silicate coolant as a
temporaryreplacement.Makesureit
is a high-quality coolant
recommended for aluminum engines.
Continued use of any non-Honda
coolant can result in corrosion,
causing the cooling system to
malfunction or fail. Have the cooling
system flushed and refilled with
Honda antifreeze/coolant as soon as
possible.
CONTINUED
Adding Engine Coolant
Engine Coolant
Maintenance
475
MAX
MIN
Removing the radiator cap
while the engine is hot can
cause the coolant to spray out,
seriously scalding you.
Always let the engine and
radiator cool down before
removing the radiator cap.
09/03/13 16:29:48 31SZA610 0480 
2010 Pilot

Table of Contents

Other manuals for Honda 2010 Pilot

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda 2010 Pilot and is the answer not in the manual?

Honda 2010 Pilot Specifications

General IconGeneral
BrandHonda
Model2010 Pilot
CategoryAutomobile
LanguageEnglish

Related product manuals