Continued
453
uuReplacing Light BulbsuFog Light Bulbs
*
1. Push the tab to remove the coupler.
2. Rotate the old bulb to the left to remove.
3. Insert a new bulb into the headlight
assembly and turn it to the right.
4. Insert the coupler into the connector of the
bulb.
Fog Light Bulbs
*
When replacing, use the following bulbs.
1. Pull the hole of the cover with your finger,
then remove it.
■
Low Beam Headlights
Fog Light: 35 W (H8 for halogen bulb type)
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect the glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alcohol and a clean cloth.
* Not available on all models
15 CR-V-31T0A6300.book 453 ページ ２０１５年２月２日 月曜日 午前１０時３５分
To Next Page
Loading...
Need help?
General
