Indicators
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
*
Parking Brake
and Brake System
Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
*1
, then goes off if the parking
brake has been released.
●
Comes on when the parking brake is
applied, and goes off when it is
released.
●
Comes on when the brake fluid level
is low.
●
Comes on if there is a problem with
the brake system.
●
The beeper sounds and the indicator
comes on if you drive with the
parking brake not fully released.
●
Comes on while driving - Make sure the
parking brake is released. Check the brake
fluid level.
2 What to do when the indicator comes
on while driving P. 501
●
Comes on along with the ABS indicator
- Have your vehicle checked by a dealer.
2 If the Brake System Indicator (Red)
Comes On P. 501
Low Oil Pressure
Indicator
●
Comes on when you turn the ignition
switch to ON (w
*1
, and goes off
when the engine starts.
●
Comes on when the engine oil
pressure is low.
●
Comes on while driving - Immediately
stop in a safe place.
2 If the Low Oil Pressure Indicator Comes
On P. 499
To Next Page
Loading...
Need help?
General
