*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
*
Malfunction
Indicator Lamp
●
Comes on when you turn the ignition
switch to ON (w
*1
, and goes off
when the engine starts, or after
several seconds if the engine did not
start. If “readiness codes” have not
been set, it blinks five times before it
goes off.
●
Comes on if there is a problem with
the emissions control systems.
●
Blinks when a misfire in the engine's
cylinders is detected.
●
Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 515
●
Comes on while driving - Have your
vehicle checked by a dealer.
●
Blinks while driving - Stop in a safe place
where there are no flammable objects. Stop
the engine for 10 minutes or more, and wait
for it to cool down. Then, take your vehicle
to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 500
Charging System
Indicator
●
Comes on when you turn the ignition
switch to ON (w
*1
, and goes off
when the engine starts.
●
Comes on when the battery is not
charging.
●
Comes on while driving - Turn off the
heating and cooling system
*
/climate control
system
*
and rear defogger to reduce
electricity consumption.
2 If the Charging System Indicator Comes
On P. 499
Shift Lever
Position Indicator
●
Indicates the current shift lever
position.
2 Shifting P. 368
—
To Next Page
Loading...
Need help?
General
