568
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1. Push the tab to remove the coupler.
2. Rotate the old bulb counter-clockwise to
remove.
3. Insert a new bulb into the headlight
assembly and turn it clockwise.
4. Insert the coupler into the connector of the
bulb.
High beam headlight: 60 W (HB3 for halogen bulb type)
*
High beam headlight: LED type
*
Low beam headlight: 55 W (H11 for halogen bulb type)
*
Low beam headlight: LED type
*
■
High Beam Headlights
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the trunk, have the aiming readjusted
at a dealer or by a qualified technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Headlights are LED type. Have an authorized Honda
dealer inspect and replace the light assembly.
Models with halogen headlights
Models with halogen headlights
Models with LED headlights
Models with halogen headlights
* Not available on all models
20 CIVIC 4D HCM_HMIN_J (KA KL KC)-31TBA6400.book 568 ページ ２０１９年６月７日 金曜日 午後４時４５分
To Next Page
Loading...
Need help?
General
