A child seat with a tether can be
installed in any seating position in
the back seat.
Each rear outside seating position
has an anchorage point on the seat-
back, and the center seating position
has an anchorage point in the ceiling
near the tailgate.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
Tighten the strap according to the
seat maker’s instructions.
Reinstall the dual deck cargo shelf.
On vehicles with the dual deck
cargoshelf,removeit(seepage
).
After properly securing the child
seat with the lap/shoulder belt
(see page ), route the tether
strap over the top of the seat-back
and through the legs of the head
restraint.
1. 3.
2. 4.
5.
117
47
CONTINUED
Installing a Child Seat with a
Tether
Using an Outer Anchor
Installing a Child Seat
Driver and Passenger Safety
49
TETHER STRAP HOOK
ANCHOR
ANCHOR
10/07/09 18:14:50 31SWA640_054
To Next Page
Loading...
Need help?
General
