16 Operating Controls
Operating Controls
The start button is used for starting the engine.
Pushing the button in starts the engine. See
Starting Procedure, page 27.
When the start button is pushed, the starter
motor will crank the engine.
The engine stop button is used to turn the
engine off in an emergency. To operate, push
the button in and hold it in until the engine
stops completely.
The front brake lever is used to slow or stop
your motorcycle. To operate, pull the lever. For
information on braking techniques, see
page 31.
The throttle controls engine rpm (speed). To
increase engine rpm, rotate the grip toward you.
To reduce engine rpm, rotate the grip away
from you. The throttle will automatically return
to the closed position (engine idle) when you
remove your hand.
Start Button
Engine Stop Button
Front Brake Lever
Throttle
31K99Q00_19 CRF250F.book 16 ページ ２０１８年８月１日 水曜日 午前１１時６分
To Next Page
Loading...
Need help?
General
